EMPATHANE TOPCOAT 55210 is a two-component, glossy acrylic polyurethane coating, cured with aliphatic isocyanate, with good gloss and colour retention.As a finishing coat for protection of structural steel in severely corrosive atmospheric environment,where light-fastness and gloss retention are required.Minimum temperature for curing is -10°C/14°F.Maximum, dry exposure only: 120°C/248°F see REMARKS overleafPart of Group Assortment. Local availability subject to confirmation.
Complies with European Fire Standard EN 13501-1; classification B-s1, d0.Approved as a low flame spread material when used as part of a predefined paint system. Please refer to “Declaration of Conformity” on www.Hempel.com for further details.Complies with EU Directive 2004/42/EC: subcategory j.
Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation.Minimum temperature for curing is: -10°C/14°F. At the freezing point and below be aware of the risk of ice on the surface, which will hinder adhesion. The film formation may be adversely affected by light rain, high humidity and/or condensation during application and the following interval after application:10 hours , 20°C/68°FIn confined spaces provide adequate ventilation during application and drying.