Douala
Douala
+237 690 181 685 465 King Akwa Street
USD, $
USD, $
WOOCS v.1.3.4.1
Email: contact@marlyshipchandler.net

FUEL POWER CONDITIONER 25 LTR FUEL CONDITIONER Product number : 778785

0.00$

FUEL POWER CONDITIONER 25 LTR FUEL CONDITIONER

oduct number : 778785

Unitor™ FuelPower™ Conditioner stabilizes and stops sludge formation in fuel tanks. Unitor™ FuelPower™ Conditioner also improves separation reducing the amount of sludge wasted.

Description
Reviews (0)

Fuel stability and compatibility is an increasing problem with modern marine heavy fuels, especially with blending of low sulfur fuels.

The solution for handling these unstable and incompatible fuels is Unitor™ FuelPower™ Conditioner, it stabilizes and stops sludge formation in fuel tanks.

Unitor™ FuelPower™ Conditioner also improves separation reducing the amount of sludge wasted keeping the fuel homogeneous through the whole fuel system delivering a stable fuel ready for combustion.

Features

  • Stabilizes fuel blends, reducing compatibility problems
  • Disperses and prevents sludge formation
  • Reduces the amount of sludge wasted in the centrifugal separator

Benefits

  • The conditioning properties of Unitor™ FuelPower™ Conditioner ensures your fuel is stable and that a minimum of sludge is wasted in tanks and centrifugal separators
  • With purifier working efficiently, filters clean and fuel system in good shape you can focus on the important things

Specification

 

Directions for use

Dosage and control
Ideally, FuelPower Conditioner should be dosed directly into the bunker tank prior to bunkering. However, it can be introduced to the settling tank or during transfer from storage. Dosage rates are best determined from the results of fuel analysis, i.e. sediment content or compatibility test which is easily performed on board using the Compatibility Test Kit.

ASTM SPOT 1 2 3 4 5
SEDIMENT% 0.05 OR LESS 0.05 0.1 0.2* 0.5 OR OVER*
DOSE RATE **1:20 000 1:10 000 1:5000 1:2500 1:1000

* Avoid using this fuel if possible.

** Fully compatible blends, with a sediment percentage of less than 0.05, should not require treatment for incompatibility. Marginal number 1 spots may cause sludging if the fuel is not handled carefully, so some treatment may be necessary, especially if other problems such as water content or corrosion are apparent.

If test results are not available, an initial dose of 1:15 000 is recommended, and adjustments made as necessary.

The average dosage for FuelPower Conditioner is 1:15 000 or 67 ppm. When starting a dosage into a fuel tank it is advisable to use a staged dosage to avoid high amounts of sludge from the fuel into purifiers and filters. This is especially important if the fuel tank has not been cleaned for an extended period of time. With a stage dosing smaller amounts of sludge will be picked up and over a longer period of time.

DOSING DOSAGE LEVEL COMMENT
1st Time 1:25 000 Initial dosage not to upset the tank
2nd & 3rd Time 1:20 000 Second and third dosages can be done a bit higher as most of the easily available sludge will be gone
4th time and forward 1:15 000 From the 4th dosage and forward the recommended dosage of 1:15 000 can be used

Reviews

There are no reviews yet.

Be the first to review “FUEL POWER CONDITIONER 25 LTR FUEL CONDITIONER Product number : 778785”

Your email address will not be published. Required fields are marked *

Open chat
Need Help?
Hello
Can We Help You?